Product ID:PR-1141 PC-50 POLAR WHITE, PART B
MSDS Date:07/25/1990
FSC:8030
NIIN:00N022260
MSDS Number: BLWWC

PRODUCTS RESEARCH & CHEMICAL CORP

5430 SAN FERNANDO ROAD
GLENDALE, CA 91209
US

Emergency Phone: 800-228-5635;800-424-9300(CHEMTREC)

Info Phone: 818-240-2060

Preparer: RDC

Cage: DO563

PRODUCTS RESEARCH & CHEMICAL

1800 GLENDALE, CA 91209 US

Telephone: 818-240-2060

Cage: DO563

3.94.

CAS: 110-43-0

RTECS: MJ5075000

Fraction By Weight: 40%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM

POLYURETHANE PREPOLYMER; (POLYESTER POLYOL POLYMER)

CAS: 59330-00-6

Fraction By Weight: 30%

ISOCYANIC ACID, METHYLENEDI-4,1-CYCLOHEXYLENE

CAS: 5124-30-1

RTECS: NQ9250000

OSHA PEL 0.01 PPM,C

ACGIH TLV: 0.005 PPM

POLYURETHANE PREPOLYMER; (POLYESTER POLYOL POLYMER)

CAS: 55636-48-1

ISOCYANIC ACID, METHYLENE

CAS: 4098-71-9

RTECS: NQ9370000

OSHA PEL S 0.005PPM/0.02STEL

ACGIH TLV: 0.005 PPM; 9394

RESEAL CONTAINERS IF MOISTURE CONTAMINATION IS

RTECS: 9999999ZZ

AIRBORNE LEVELS OF SOLVENT/ISOCYANATE IS EXCESS OF

RTECS: 9999999ZZ

LOOSELY COVERED FOR 48 HOURS.

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:VAPORS WILL CAUSE IRRITATION WITH
WATERING OF EYES. LIQUID CONTACT WILL CAUSE IRRITATION AND POSSIBLE
PERMANENT DAMAGE. SKIN:LOCAL SWELLING, SORENESS, ITCHING. IN
SENSITIZED INDIVIDUALS, EXPOSURE TO LIQUID OR VAPORS WILL RESULT
IN ALLERGIC SKIN RASH. INHAL:IRRITATION OF NOSE, THROAT AND EYES.
(EFTS OF OVEREXPOSURE)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:BRONCHIAL IRRIT W/COUGHING, TIGHTNESS
IN CHEST & POSS DFCLTY IN BRTHG. MAY PRODUCE ASTHMA-LIKE SYMPTOMS
IN SENSITIZED INDIVIDUALS. INDIVIDUALS SUFFERING FROM ASTHMA/OTHER
CHRONIC RESP CNDTNS MAY EXHIBIT HEIGHTENED SENSITIVITY TO
ISOCYANATES & SHOULD AVOID INHAL EXPOS. INGEST:IRRIT OF DIGESTIVE
TRACT & STOMACH.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE:FLUSH WITH LUKE WARM WATER FOR AT LEAST 15 MINUTES. IF
SYMPTOMS PERSIST, CALL MD. SKIN:WASH WITH SOAP & WATER. IF SYMPTOMS
PERSIST, CALL MD. INHAL:REMOVE TO FRESH AIR. IF SYMPTOMS ARE
PRESENT CALL MD. INGEST:CALL MD.

Flash Point Method:PMCC
Flash Point:102F,39C
Lower Limits:1.1%
Upper Limits:7.9%
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . USE WATER TO COOL HEAT EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:HIGH TEMPERATURES MAY CAUSE PRESSURE
BUILDUP IN CLOSED CONTAINERS.

Spill Release Procedures:REMOVE ALL IGNIT SOURCES. WEAR AIR-SUPPLIED
RESP FOR MAJOR UNVENT SPILL. COVER W/ABSORB MATL, ADD DECONTAM SOLN
(5% CONC AMMONIA, 2% DETERGENT, 93% WATER) & ALLOW TO RECT FOR 10
MINS. COLLECT IN CNTNR S, ADD ADDITIONAL DECOMTAM SOLN & KEEP (SEE
ING 8)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:SPRAY APPLICATION SHOULD BE ISOLATED
TO REDUCE POTENTIAL FOR EXPOSURE. PROTECT WORKERS AND GENERAL
PUBLIC DURING SPRAY APPLICATION.
Other Precautions:IN OPEN AREAS, AT LEAST 100 FEET SHOULD SEPARATE OPER
FROM ANY PERS NOT PROT AS STATED. INSIDE SPRAY APPLIC SHOULD BE IN
AREA SEPARATED FROM OTHER WORK AREAS BY WALLS & VENT BY LOC VENT,
PROPERLY DESI GNED & OPERATED I/A/W (SEE SUPP DATA)

Respiratory Protection:NIOSH/MSHA APPROVED AIR SUPPLIED RESPIRATOR MUST
BE USED DURING SPRAY APPLICATION.
Ventilation:GEN VENT TO MAINTAIN VAPS BELOW PEL. WHEN APPLYING IN
CONFINED AREAS/IN OTHER CIRCUMSTANCES LIKELY TO PRODUCE(SEE ING 7)
Protective Gloves:SOLVENT RESISTANT GLOVES.
Eye Protection:CHEM WORK GOG W/FULL LENGTH FSHLD
Other Protective Equipment:FULL, PERMEATION RESISTANT, PROT SUIT INCL
HEAD COVERING AND OVERSHOES. PROTECT FULL FROM ANY CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
OTHER PREC:ACGIH GUIDELINES AS CONTAINED IN ITS INDUSTRIAL VENTILATION
PUBLICATION OR OTHER APPROPRIATE COLLECTION SYSTEM TO COLLECT ANY
OVERSPRAY. UNPROT PERS MUST BE PVNTD FROM CONTACTING UNCURED RE
SIDUE ON EQUIP & AREA SURFS UNTIL PROD HAS CURED. AVOID MOISTURE
CONTAM WHICH WILL CAUSE CO2 PRESS. DO NOT (SEE ING 4)

HCC:F4
Vapor Density:SEE ING 1
Spec Gravity:0.96
Evaporation Rate & Reference:SEE ING 1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR VISCOUS LIQUID

Stability Indicator/Materials to Avoid:YES
WATER, ALCOHOLS, STRONG BASES, AMINES. STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:COX.

Waste Disposal Methods:EPA WASTE NO. D-001. DISPOSE OF SPILLAGE IN
COMPLIANCE WITH FEDERAL, STATE, AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.